SSB VERTEX VX-1700

VX-1700 multi-mode mobile HF radio features Large Channel Capacity The VX-1700 can store 200 channels arranged in five groups with the flexibility to have any number of channels per group. Each channel can be programmed with a 6-character alphanumeric description for quick and easy call management. Automatic Link Establishment ( ALE) Option With the ALE-1 option installed, the VX-1700 Automatic Link Establishment feature selects the channel with the best LQA ( Link Quality Analysis) score from the programmed channels automatically. Flexible Calling Options The VX-1700 provides six different built-in calling modes to support various communications requirements including SELCALL, TELCALL, Message Call ( for text messages) , Position Request Call, Position Send Call and Beacon Request Call to check signal quality. Dual Watch Operation Operate the VX-1700 radio on one channel while periodically monitoring the designated memory channel to ensure a call is not missed. Ideal for emergency management situations when it is important that a call gets through to dispatch. Additional Features • Four programmable keys • Noise blanker • CW Semi break-in • CW Side tone function • VOX • VFO Mode • Field memory channel storage VX-1700 multi-mode mobile HF radio specifications General Specification Frequency Range RX: 30 kHz – 30.0000 MHz; TX: 1.600 – 30.0000 MHz Number of Channels 200 Emission Type A1A( CW) ; J3E( LSB/ USB) ; A3E( AM) ; J2B ( USB/ LSB) Power Requirements DC 13.8 V ± 15% , negative ground Frequency Synthesiser Steps 10 Hz, 100 Hz, 1 kHz Frequency Stability ± 1 ppm ( -10º C to + 55º C) TYP Current Consumption Standby 25 mA; RX, no signal: 1.0 A; RX: 1.5 A TX: 24 A ( 125 W output) Operating Temperature Range -10º C to + 55º C Antenna Impedance 50 Ohms Dimension ( W x H x D) 241 x 99 x 285 mm Weight ( Approx.) 4.3 kg Receiver Specification Intermediate Frequency 1st: 45.274 MHz, 2nd: 24 kHz Sensitivity ( A1A/ J2B/ J3E/ A3E: S/ N 10 dB) 0.5 – 1.6 MHz: 1.41 ¼ V ( A1A/ J2B/ J3E) ; 8 ¼ V ( A3E) 1.6 – 30 MHz: 0.16 ¼ V ( A1A/ J2B/ J3E) ; 1 ¼ V ( A3E) Squelch Sensitivity ( A1A/ J2B/ J3E) 0.5 – 1.6 MHz: 2.5 ¼ V 1.6 – 30 MHz: 2 ¼ V IF and Image Rejection Better than 80 dB Selectivity A1A( W) , J2B( W) , J3E: > 2.2 kHz @ -6 dB; 500 Hz @ -6 dB; 6 kHz @ - 6 dB; < 20 kHz @ -60 dB Audio Output 2.2 Watts into 8 Ohms @ 10% THD Audio Impedance 4 – 16 Ohms ( 8 Ohms Nominal) Conducted Radiation Less than 4000 ¼ ¼ W Transmitter Specification Output Power 125 Watts ( A1A, J2B, J3E @ 1.6000 – 3.9999 MHz) * 100 Watts ( A1A, J2B, J3E @ 4.0000 – 30.000 MHz) 31 Watts AM Carrier ( A3E @ 1.6000 – 3.9999 MHz) 25 Watts AM Carrier ( A3E @ 4.0000 – 30.000 MHz) Duty Cycle RX: TX = 4 min. : 1 min. Modulation J3E: PSN type modulator A3E: Low-level ( early stage) Spurious Radiation -50 dB ( Harmonics) J3E Carrier Suppression Better than 50 dB below peak output Undesired Sideband Suppression Better than 60 dB below peak output Audio Response ( J3E) Not more than -6 dB from 400 Hz – 2500 Hz Occupied Bandwidth A1A: less than 0.5 kHz; J3E: less than 3.0 kHz; A3E: less than 6.0 kHz Microphone Impedance 200 – 10 k Ohms, ( 600 Ohms Nominal) Untuk info harga dan stock barang, Hub: tardi 021-49771333, 081314293338 http: / / gunapris.net YM; tardi_ gunapris Komp. Larangan Indah Jl. Anggrek 2 No. 29 Ciledug, Tangerang.